Powerful Yet Easy

Designed for intuitive use and easy maintenance.

Out of the box, up and running in under 30 minutes.

Includes an easy to read quickstart guide.

Easy To Use Keypad

Allows faster setup every time. You get done faster, which means more profit per job, more jobs per week.

Quick Test Cut Button makes adjusting for different vinyls easy.

Dial adjustment for force and speed lets you adjust "on the fly", no pausing necessary, no LED menu, just turn the dial.

Repeat plot button stores last job. Makes it easy to do multiple copies without tying up the computer.

Down force is easy to adjust to whatever range of down force you need.

Start/Stop button lets you pause job, forward material for inspection, then resume cutting where you left off.

Customised Control

Additional easy-to-understand cutter adjustments are displayed on the PC instead of the complex and cryptic LED used on other cutters.

Diagnostic tests and test cuts can be performed from the Control Center, which provides detailed step-by-step instructions as you use it.

Groups of settings for specific materials can be stored and recalled when needed. The number of groups of settings that can be saved is unlimited. (Most cutters have only 4)

The Control Center allows you to scale any job sent to the cutter as needed.

The range of downforce (high & low limits) can be set to your preference. Such as a high range for sandblast material (200 gr. to 400 gr.). If all you use is high performance vinyl, you can set a low range (50gr.-120gr.).

SmarTrac™ includes a Print Cut Feature used with an optional Print/Cut Alignment tool for cutting around pre-printed images on vinyl.

The tagboard cutting feature is used for cutting stencils, diecut labels, and single layer materials (such as magnetic sheeting).

Convenience Tool Tray